Miter-It™ Auto, Electric
$1,095.00 USD
The Miter-It™ Auto, Electric system enables vacuum-powered mitered laminations “on the go”. Save time and money by eliminating the need for a helper—wherever you would need a hand to hold the material, put a Miter-It™ Auto clamp there instead! The Electric model uses a powerful, compact vacuum pump that runs on AC or battery power, so you can use this system at any jobsite. More
Product Code: MTR-153E-19
Availability: Worldwide
(pricing may vary)
JOBSITE MITERS MADE EASY
The Miter-It™ Auto, Electric system enables vacuum-powered mitered laminations “on the go”. Save time and money by eliminating the need for a helper—wherever you would need a hand to hold the material, put a Miter-It™ Auto clamp there instead! The Electric model uses a powerful, compact vacuum pump that runs on AC or battery power, so you can use this system at any jobsite. The user-friendly clamps securely and reliably hold heavy, drop-down edges at 90°, enabling finished-side-up laminations and providing better results than taping methods alone. Seaming the joint finished-side-up offers increased safety for workers and reduced risk of damage to the piece by not having to flip the material for gluing. This also keeps the seam in view for dialing-in perfect joints, and makes clean-up fast and easy. The 10-port Electric Vacuum Manifold allows adding eight additional clamps to cover more surface area. Typically, one Miter-It™ Auto clamp every 3 to 4 feet is sufficient, but more may be used for extra-long or heavy aprons.
HIGHLIGHTS
- Mitered laminations “on the go”
- Saves labor by eliminating the need for a helper
- Miter finished side up—safer for workers and material; keep the seam in view
- Compact vacuum pump runs on AC or battery power for use at jobsite
- Reliably holds heavy drop-down edges at 90°
- Coarse adjustment lever for quick apron placement
- Horizontal and vertical fine-tuning knobs for ultimate seam control
- Non-marking, proprietary synthetic* rubber cups are highly-durable and feature FTS™ technology for optimum hold, even on textured materials
- Accommodates edges up to 12” tall, 3 cm thick
ACCESSORIES
- The Miter-It™ Auto clamp (part # MTR-153) allows expansion of your Miter-It™ Auto system.
- The Vacuum Pump Kit (part # VMP600-KIT) is a powerful, yet compact, automatic vacuum pump that operates on AC power or eight AA batteries (for installations where electricity is not available)
| Product Name | Miter-It™ Auto, Electric |
| Patent | Applicable Patents |
| Part # | MTR-153E-19 |
| MSRP | $1,095.00 USD |
| Includes | Two miter clamp units with 5” gray cups, two cup covers, vacuum pump, international power adapter, AA battery holder, battery power adapter, 10-port Vacuum Manifold, ten port plugs, 20’ air tubing, quick-connect male coupler, storage case (may vary from image) |
| Product Dimensions | 28" x 14" x 14" (all components in case) |
| Product Weight | 25.4 lbs (all components in case) |
| Package Dimensions | 29" x 15" x 15" |
| Shipping Weight | 26 lbs |
| Clamping Range | 50 mm to 304 mm (2 in. to 12 in.) |
| Materials | Anodized aluminum, aluminum, stainless steel, silicone, zinc plated steel, polyurethane air tubing |
Videos
Related Products
Customer Reviews | Miter-It™ Auto, Electric
Mark Strawn, Moros Fabrication
Our shop here in Boulder, CO has seen a big increase in customers and designers requesting mitered edges to achieve a thicker looking counter top with out having a laminated (sandwich) edge. The time required to lay-up such an edge was taking quite a bit longer than the standard laminating process so we started looking for a clamp made for this type of work. Most of the clamps we found required an extra step of flipping the material to set the edge or required moving the material off the table a good distance to allow clearance for the clamping function. All these issues were resolved with the Omni Miter-it clamp. Our fabricators were skeptical at first with the simplicity of the design, then asked us to order more clamps after the first job went so smooth. The miter process is now faster for us than the laminating process and we are able to sell this better looking edge for more $ than the lam at a lower fabrication cost. We are super happy with all the products from Omni and this clamp is certainly a winner with us.
Write a Review
Fill out my online form.